XIMEA’s new CB013 industrial video camera hits 3500fps @ 1280×864 pixels. The slower CB019 “only” hits 2500fps @ 1920×1080 pixels. At those frame rates, you can bet that FPGAs are involved.

2018年1月26日 | By News | Filed in: News.



XIMEA has added two new high-speed industrial cameras to its xiB-64 family: the 1280×864-pixel CB013 capable of imaging at 3500fps and the 1920×1080-pixel CB019 capable of imaging at 2500fps. As with all digital cameras, the story for these cameras starts with the sensors. The CB013 camera is based on a LUXIMA Technology LUX13HS 1.1Mpixel sensor and the CB019 is based on a LUXIMA Technology LUX19HS 2Mpixel sensor. Both cameras use PCIe 3.0 x8 interfaces capable of 64Gbps sustained transfer rates. Use of the PCIe interface allows a host PC to use DMA for direct transfers of the video stream into the computer’s main memory with virtually no CPU overhead.



XIMEA CB013 Camera.jpg 



Both cameras are also based on a Xilinx Kintex UltraScale KU035 FPGA. Why such a fast FPGA in an industrial video camera? The frame rates and 64Gbps PCIe interface transfer rate are all the explanation you need. The Kintex UltraScale KU035 FPGA has 444K system logic cells and 1700 DSP48E2 slices—ample for handling the different sensors in the camera product line and just about any sort of video processing that’s needed. The Kintex UltraScale FPGA also incorporates two integrated (hardened) PCIe Gen3 IP blocks with sixteen bulletproof 16.3Gbps SerDes transceivers to handle the camera’s PCIe Gen3 interface.


Note that XIMEA has previously introduced large camera family lines based on Xilinx FPGAs, such as the xiC family based on the Xilinx Artix-7 XC7A50T FPGA. (See “Ximea builds 10-member xiC family of USB3 industrial video cameras around Sony CMOS sensors and Xilinx Artix-7 FPGA.”)



For more information about these cameras, please contact XIMEA directly.




via Xcell Daily Blog articles http://ift.tt/2fBJIws

January 26, 2018 at 03:14AM


您的电子邮箱地址不会被公开。 必填项已用*标注