Nallatech 250S+ SSD accelerator boosts storage speed of four M.2 NVMe drives using Kintex UltraScale+ FPGA

2017年11月30日 | By News | Filed in: News.

http://ift.tt/2inr4ww

 

This month at SC17 in Denver, Nallatech was showing its new 250S+ high-performance SSD-accelerator PCIe card, which uses a Xilinx Kintex UltraScale+ KU15P FPGA to implement an NVMe SSD controller/accelerator and the board’s PCIe Gen4 x8 interface. You can plug SSD cards or NVMe cables into the card’s four M.2 NVME slots so you can control as many as four on- or off-board drives with one card. The card comes in 3.84Tbyte and 6.4Tbyte versions with on-board M.2 NVMe SSDs and can control a drive array as large as 25.6Tbytes using NVMe cables.

 

 

Nallatech 250S NVMe accelerator card.jpg 

 

Nallatech 250S+ NVMe SSD accelerator card based on a Xilinx Kintex UltraScale+ FPGA

 

 

 

 

Nallatech 250S NVMe accelerator card with NVMe cables.jpg 

 

Nallatech 250S+ NVMe SSD accelerator card with NVMe cables

 

 

 

Here are the card’s specs:

 

 

Nallatech 250S NVMe accelerator card specs.jpg 

 

 

And here’s a block diagram of the Nallatech 250S+ NVMe accelerator card:

 

 

 

Nallatech 250S NVMe accelerator card block diagram.jpg 

 

 

As you can see, the Kintex UltraScale+ FPGA implements the entire logic design on the card, driving the PCIe connector, managing the four attached NVMe SSDs, directly controlling and operating the card’s on-board DDR4-2400 SDRAM cache, and even implementing the card’s JTAG interface.

 

 

For more information about the Nallatech 250S+ NVMe accelerator card, please contact Nallatech directly.

 

 

 

IT.数码

via Xcell Daily Blog articles http://ift.tt/2fBJIws

November 30, 2017 at 04:50AM


发表评论

电子邮件地址不会被公开。 必填项已用*标注