Digilent has announced a major upgrade to the Zynq-based Zybo dev board, now called the Zybo Z7. The original board was based on a Xilinx Zynq Z-7010 SoC with the integrated Arm Cortex-A9 MPCore processors running at 650MHz. The new Zybo Z7-10 and -20 dev boards are based on the Zynq Z-7010 and Z-7020 SoC respectively, and the processors now run at 667MHz. The Zybo Z7-10 sells for $199 (currently, you can get a voucher for the Xilinx SDSoC development environment for $10 more) and the Zybo Z7-20 board with triple the programmable logic resources sells for $299 (and currently includes the SDSoC voucher).
Digilent Zybo Z7-20 Dev Board based on Zynq Z-7020 SoC
In addition to the faster processors, there are several additional upgrades made to the Zybo Z7 versus the Zybo dev board. SDRAM capacity has increased from 512Mbytes on the original Zybo board to 1Gbyte on the Zybo Z7. The new boards now have two HDMI ports to support “bump-in-the-wire” HDMI applications. Both boards now also include a connector with a MIPI CSI-2 interface for video camera connections. You can plug a Raspberry Pi Camera Module directly into this connector and Digilent also plans to offer a camera module for this port.
Here’s a video explaining some of the highlights of the new Zybo Z7.
Note: For more information about the Zybo Z7 dev board, please contact Digilent directly.
via Xcell Daily Blog articles http://ift.tt/2fBJIws
November 10, 2017 at 04:48AM