Make Your Own Steadycam Mount

2013年3月20日 | By News | Filed in: News.

http://feedproxy.google.com/~r/hackaday/LgoM/~3/4xblik1tzts/

gopro-steadycam

[Ryan] wrote in to tell us about his partially 3D-printed steadycam mount on Instructables. In the video after the break, the camera does stay quite steady through some basic tests. The base is a paint roller handle, and the device works by using a long arm on the bottom with some weights to keep the camera upright. This handle is attached to the weights and camera through a 3-axis Gimbal system that allows the camera to stay relatively steady even if your hand isn’t. A full bill of materials and the needed STL files are provided.

Of course if you’re “old school” and like to use subtractive manufacturing methods, you can always check out this [camera stabilizer] from [Do-It-Yourself Gadgets]. The device works in a nearly identical manner, but the BOM seems to be: metal, screws, threaded rod. There are some cool animated GIFs of it in action on the site, or check out the video after the break.

As a “camera mount” bonus, check out this super easy [GoPro] (or any other small camera) clamp mount.  Really clever.

[youtube http://www.youtube.com/watch?v=qeCgvwQO9I4?version=3&rel=1&fs=1&showsearch=0&showinfo=1&iv_load_policy=1&wmode=transparent&w=470&h=315]
[youtube http://www.youtube.com/watch?v=J0pbN4p51eA?version=3&rel=1&fs=1&showsearch=0&showinfo=1&iv_load_policy=1&wmode=transparent&w=470&h=315]

Filed under: digital cameras hacks


发表评论

邮箱地址不会被公开。 必填项已用*标注